Frosthaven 3D Printing Progression

If you're printing Frosthaven components as you're playing the game, here are some high level notes about what kinds of models you're going to need for which scenarios.  I'll keep it as high level as possible to avoid spoilers, but there are going to be call outs to specific scenarios and boss descriptions.

Scenario Monsters Overlays
0 Hound Snow Door, Damage Trap, Snowdrift, Snow Rock, Stalagmites, Treasure
1-3 Hound, Algox: Archer, Guard, Priest, and Scout, City Guard Log, Rubble, Debris, Large Debris, Snow Rock, Treasure, Stalagmites
4 Algox: Archer, Guard, and Scout Ice Pillar, Large Ice Crystal, Treasure
5 Frozen Corpse, Ice Wraith Ice Pillar, Altar, Treasure
6 Frost Demon, Snow Imp Snowdrift, Snow Rock
7 Frozen Corpse, Various Lurkers Traps, Ice Pillar, Treasure
8 Hound, Polar Bear, Snow Imp Snow Rock
9 Ice Wraith, Living Doom, Living Spirit, Ooze Altar, Debris, Ice Pillar, Sarcophagus, Treasure
10 Algox: Guard, Priest, Icespeaker Ice Pillar, Treasure
11 Frost Demon, Wind Demon, Algox Boss Ice Spikes, Large Ice Crystal, Snow Rock, Large Snow Rock, Treasure
12 Ancient Artillery, Night Demon, Steel Automaton Trap, Rubble, Barricade, debris, Treasure
13 Shrike Fiend, Snow imp, Wind Demon rubble, Treasure
14 Abael Herder, Lightning Eel, Pirahna Pig Water, Large Water, Huge Water, Large Snow Rock, Snow Rock, Treasure
15 Chaos Demon, Robotic Boltshooter, Ruined Machine Rubble, Control Console, Metal Cabinet
16 Ancient Artillery, Flaming Bladespinner, Ruined Machine Debris, Treasure
17 Ice Wraith, Living Doom, Living Spirit Pressure Plate, Traps, Treasure
18 Burrowing Blade, Frozen Corpse, Algox Guard Trap, Ice Spikes, Snow Drift, Ice Pillar
19 Earth Demon, Flame Demon, Ice Wraith Altar
20 Flaming Bladespinner, Ruined Machine, Steel Automaton Power Conduit, Glowing Orb, Metal Cabinet
21 Boss, Frost Demon, Living Bones, Living Spirit, Snow Imp Trap, Ice Spikes, Ice Pillar, Bookshelf, Crate, Glowing Orb, Treasure


... more to come!

Here's my notes regarding the total numbers of each standee (and a link to the model that I printed for each one):

Monsters
Algox Snowspeaker: 4
Algox Icespeaker: 4
Algox Archer: 6
Algox Scout: 6
Algox Guard: 6
Algox Priest: 6
Hound: 6
Lurker Wavethrower: 6
Lurker Soldier: 6
Lurker Clawcrusher: 4
Lurker Mindsnipper: 6
Earth Demon: 6
Flame Demon: 6
Frost Demon: 6
Sun Demon: 6
Night Demon: 6
Wind Demon: 6
Chaos Demon: 6
Black Imp: 10
Snow Imp: 10
Forest Imp: 10
Ice Wraith: 6
Frozen Corpse: 6
Living Spirit: 10
Living Bones: 6
Piranha Pig: 10
Abael Scout: 6
Abael Herder: 4
Lightning Eel: 10
Ooze: 10
Ancient Artillery: 6
Steel Automaton: 6
Robotic Boltshooter: 6
Flaming Bladespinner: 6
Ancient Machine: 10
Rending Drake: 6
Spitting Drake: 6
Polar Bear: 4
Burrowing Blade:6
Shrike Fiend: 6
Living Doom: 4
Deep Terror: 10
City Guard: 6
Savvas Lavaflow: 4
Savvas Icestorm: 4
Vermling Scout: 10
Vermling Priest: 6
Harrower Infester: 4

1 Hex Overlays












Wooden Pole: 1
Barrels: 2
Nest: 4
Ladder: 4
Pressure Plate: 4
Crate: 4
Metal Cabinet: 4
Debris: 5
Snow Rock: 5
Altar: 6
Stalagmites: 6
Lava: 6
Rubble: 6
Snowdrift: 6
Ice Pillar (upside down in photo, sorry): 9
Water: 10
Ice Spikes: 10

2 Hex Overlays












Open Sarcophagus: 2
Closed Sarcophagus: 3
Food Shelves: 3
Large Water: 4
Control Console: 4
Log: 4
Large Snowy Rock: 4
Large debris: 4
Conduit: 6
Big Rocks: 6
Bookshelves: 6
Barricade: 6

3 Hex Overlays












Snowy Tree: 3
Huge Water: 2
Large Ice Crystal: 1

Comments

Post a Comment

Popular posts from this blog

How Much Filament Do I Have Left

Image
As I approached the end of another roll of filament, I asked myself, "how much filament do I have left?"  I was getting ready to leave for work and didn't want the printer sitting idle all day with a half-finished print sitting on the bed, but I also didn't want to just put on a new roll and waste a bunch of perfectly good filament.  What to do?  Well, the answer was obvious, hit Google! Unfortunately, no answer was readily available.  Filament spools do not have standard sizes, so there's no rule-of-thumb like, "the last layer has 10 meters of filament" or the like.  Annoyed at my lack of results, I thought more about the problem and eventually reframed it for myself.  What I had here wasn't a 3D printing problem, one that might require the epic expertise of a Joel , an Angus , or a Thomas ... what I had here was a simple applied math problem.  I got out my calipers and went to work. My filament spool has those helpful little cutouts on the sid...
Read more

Prusa MK3 Stringing at .05 mm Layer Height Resolved!

Image
I've had a Prusa MK3 for several weeks and have printed nearly a kilogram of upgrades for my boardgames.  Most of that has been terrain features, which have printed beautifully at 0.1 mm layer height (check out the things I've made for some examples).  Sure, the print lines are visible (especially after applying a wash), but I'm still very happy with the results.  I haven't been so happy with attempts at printing miniatures at 0.05 mm layer height. I was vexed to find that 0.05 mm layer height prints on my brand new printer looked like garbage.  They were so covered with strings that I couldn't even remove the support material.  Admittedly, they'd be pretty awesome if I exclusively played campaigns in the Mirkwood, but that's really not what I'm going for. I tried all sorts of things to resolve the situation, and some certainly helped.  I lowered my nozzle temperature from 210 to 200 degrees.  I adjusted my printing speeds so that they'd max ...
Read more

Making Meshmixer Supports

Image
I've written tidbits of this information across a few other support-related posts, but I figured that I should put it all in one place.  I've been printing a lot of minis lately, which has meant that I've had to learn a lot about supports and 3D printing.  I use a Prusa MK3, so this post is focused on FDM supports.  I tried a lot of different support structures across several different programs and my favorite ones were tree supports in Meshmixer.  I know many others have had excellent results with other supports, but I've been happy with my results and so that's what I'm going to write about :P Generating tree supports via Meshmixer is a 2 phase process.  First, you've got to figure out your print's orientation, and second, you've got to figure out your actual supports.  For minis, that first step can be a difficult balancing act, as you probably don't want supports to connect to the most detailed parts of the mini (like its face).  You also h...
Read more