Scythe Upgrades

I love playing Scythe and have started a collection of things to print to upgrade my game.  Like I did with my Gloomhaven list, here's the models that I made myself:

Armory
Mine
Monument
Windmill
Power Token
Popularity Token
Victory Token

I finally got around to painting a bunch of these!  Here's some photos:






Comments

  1. TomBristol92August 21, 2019 at 9:56 AM

    Hi, do you print these out and sell them?

    ReplyDelete
    Replies
    1. Jason ColemanAugust 21, 2019 at 10:19 AM

      I have considered it, but I don't think that I could do it at an affordable price point. I don't remember the exact numbers, but I calculated that I'd need to charge something like $10 or $15 per faction (for the 4 buildings, 6 stars, popularity and power tokens), unpainted. Then there's the shipping costs and difficulties as well (the windmill and armory both have some very small and delicate parts). So, I don't know how much of a market there'd be for something so expensive. Another consideration is that I don't have much free time these days and would prefer to spend it designing new models rather than manufacturing/selling them.

      What I really need is to find someone who wants to become an authorized reseller and work out a deal with them. Unfortunately, most people doing commercial 3D printing don't want to touch models that require as much support & post printing processing as my models do.

      Delete
    2. TomBristol92August 21, 2019 at 2:29 PM

      Well damn.

      If I had a 3d printer I would do that deal with you, love making and painting models and loved your models as they really do add something to the game, plus I am sure if they were printed, polished up and painted then people would pay good money for them.

      Either way, love your work and hope all goes well for you:)

      Delete
    3. Jason ColemanAugust 21, 2019 at 2:52 PM

      Thanks - let me know if you ever decide to take the plunge and get a printer. In the meanwhile, it's totally fine if you want to take the files to a library or a commercial printer or something and print yourself a copy of them. The non-commercial flag on the license just means that people can't sell them as a finished product on Ebay or Etsy or something.

      Delete

Post a Comment

Popular posts from this blog

How Much Filament Do I Have Left

Image
As I approached the end of another roll of filament, I asked myself, "how much filament do I have left?"  I was getting ready to leave for work and didn't want the printer sitting idle all day with a half-finished print sitting on the bed, but I also didn't want to just put on a new roll and waste a bunch of perfectly good filament.  What to do?  Well, the answer was obvious, hit Google! Unfortunately, no answer was readily available.  Filament spools do not have standard sizes, so there's no rule-of-thumb like, "the last layer has 10 meters of filament" or the like.  Annoyed at my lack of results, I thought more about the problem and eventually reframed it for myself.  What I had here wasn't a 3D printing problem, one that might require the epic expertise of a Joel , an Angus , or a Thomas ... what I had here was a simple applied math problem.  I got out my calipers and went to work. My filament spool has those helpful little cutouts on the sid
Read more

Prusa MK3 Stringing at .05 mm Layer Height Resolved!

Image
I've had a Prusa MK3 for several weeks and have printed nearly a kilogram of upgrades for my boardgames.  Most of that has been terrain features, which have printed beautifully at 0.1 mm layer height (check out the things I've made for some examples).  Sure, the print lines are visible (especially after applying a wash), but I'm still very happy with the results.  I haven't been so happy with attempts at printing miniatures at 0.05 mm layer height. I was vexed to find that 0.05 mm layer height prints on my brand new printer looked like garbage.  They were so covered with strings that I couldn't even remove the support material.  Admittedly, they'd be pretty awesome if I exclusively played campaigns in the Mirkwood, but that's really not what I'm going for. I tried all sorts of things to resolve the situation, and some certainly helped.  I lowered my nozzle temperature from 210 to 200 degrees.  I adjusted my printing speeds so that they'd max
Read more

Using PrusaSlicer to Design Tree Supports for FDM Prints

Image
I've done a lot of work with tree supports in Meshmixer .  I don't want to denigrate the awesome utility that Meshmixer brings to the table, but it also hasn't been updated in two years.  Meanwhile, Prusa forked their version of Slic3r into PrusaSlicer and has added a bunch of support for MSLA printing... including tree supports!  And, they obviously paid a lot of attention to how tree supports are designed in tools like Meshmixer, because the PrusaSlicer interface neatly bypasses just about all of the pain points that I have when working with MM!  The one drawback is that the Tree Supports are only officially available for MSLA printers... but there's an easy way around that! In order to use PrusaSlicer to generate support trees, you need to change to one of their supported MSLA printers.  At that point, when you slice your model, it will automatically generate support trees that are tuned for that MSLA printer.  These automatically placed trees are a really good st
Read more